The Complete Guide to Fitbit’s Water Lock Feature
Fitbit water locks are cool, but sometimes you want to leave them in the pool or at a lake for the day. In that case, how do you keep your Fitbit safe? Plenty of cases can protect your tracker from water damage, but it’s always good to have a backup plan in case something goes wrong.
That’s where the water lock comes in: it lets you know when your Fitbit is getting wet and turns off its GPS function until it dries out. It’s an essential tool for anyone who spends time around pools or lakes on their Fitbit-enabled adventures!
How to Activate Water Lock Mode
To activate Water Lock Mode, you must press and hold the left button for 5 seconds. Release the button when a water lock icon appears onscreen to start water lock mode. The display will go blank, and your band will vibrate to confirm that it is in water lock mode.
I was so excited to try out my new Fitbit water lock feature. I had heard that it was great for swimming and showering, but I didn’t realize how useful it could be for other activities.
The water lock feature is also great for swimming. My friends and I love the pool, but we always have to take our trackers off before getting into the water. With the water lock turned on, we can swim and play without worrying about our devices getting wet.
What Water Lock Does
Water Lock is a special mode that keeps your Fitbit safe in the water. It prevents your device from tracking any activity while it’s submerged, making sure you’re still able to see how far and fast you’ve gone.
To activate Water Lock, press the button on your Fitbit and wait for a few seconds before releasing it again.
Turning Off the Water Lock Mode
The water lock mode is one way to prevent accidental water exposure. To turn off the feature, you must hold down your Fitbit’s button for a few seconds. The screen will flash and go blank; then, it will be turned into normal mode again with no water protection. You can wear it as usual after this step, but if you’d like more secure protection against accidental submersion in liquid or moisture, there are other options available within Fitbit’s software settings menu (see below).
Bringing Your Fitbit Back to Life
If you suspect the battery is dead, remove it and put it in an area with good light for at least 24 hours. If your Fitbit does not turn on after this time, take it to a repair shop or contact customer support for assistance.
I had just finished up a long run, and I was really sweaty. I knew that I needed to take a shower, but I didn’t want my Fitbit to track any of my movements while I was washing up. With the water lock feature turned on, I could relax and take my time in the shower without worrying about accidentally hitting a button on my tracker.
Special Considerations for Versa Users
While it’s not the most obvious feature, Fitbit’s water lock mode can be a useful tool for users. The company offers three different ways to use this feature, depending on your specific needs:
- For swimming laps in the pool or ocean, you’ll want to enable Fitbit’s custom activity profile before entering the water. This will allow you to track how many laps there are and what speed they were done at.
- If you wear your device while showering, simply press down on the center button until “water lock” shows up under settings (it should already be enabled if you’re using Versa). This setting ensures that no data is collected by your tracker or phone while underwater—meaning no exercise tracking!
- Finally, if using Fitbit as an everyday health tracker isn’t enough, but you still want access to some of its most advanced features like heart rate monitoring and sleep tracking functionality while out at sea without worrying about losing any data during these activities either, then just make sure none of these settings are enabled when swimming outdoors too!
Learn how to keep your Fitbit safe in the water
The water lock feature is one of the best features on any fitness tracker, but it’s not quite as helpful if you don’t know how to use it.
Fitbit Charge 3, Fitbit Charge 2, and Fitbit Charge HR all have this feature that prevents accidental water exposure damage. When activated (by setting it in your settings), the device will stop working when submerged in water for extended periods—so long as there isn’t air pressure pushing against it—and it can be turned off by turning off the setting at any time.
FAQ Section
What is the water lock on Fitbit?
When it comes to fitness trackers, Fitbit is one of the most popular brands. One of its features is a water lock, which allows you to track your water intake. The Fitbit water lock feature is a way to track your water intake. It’s done by eliminating the need for manual input and using an algorithm to calculate how much water you drink in a day.
The Fitbit Water Lock feature lets you know how much water you should drink each day by tracking what you drink and your activity level.
What does water lock mean on Fitbit?
The water lock function on the Fitbit is to prevent accidental data loss when you are swimming or in the shower. The Fitbit will automatically lock and stop recording your data while in water.
When you go underwater, the Fitbit will automatically detect that it is in water and lock its screen so it won’t be accidentally tapped. The Fitbit will also track your time underwater and set a timer for how long you are under. In order to activate this mode, users need to go to Settings > Display > Water Lock and toggle it on.
How to unlock the Fitbit water lock?
Fitbit water lock is a security measure that prevents the tracker from being removed while it’s in the water. To unlock the Fitbit water lock, you need to press and hold the button for a few seconds until it vibrates.
How to turn off the water lock on Fitbit inspire2 ?
The Fitbit water lock feature is designed to protect your device from water damage. It will not track your heart rate or log any data when you are in the water. You can turn off the water lock by following these steps:
1) Tap the upper left-hand corner of your tracker to reveal the tracker menu.
2) Tap on Settings and then tap on Water Lock.
3) Turn off the “Water Lock” by tapping on it twice.
Conclusion
You might wonder how to keep your Fitbit in water without damaging it. Well, that’s where the Water Lock feature comes into play! This feature protects your Fitbit from damage by keeping its internal components dry, so you don’t have to worry about getting it wet or submerging it underwater for prolonged periods. It should also be noted that this feature doesn’t work with all models; some Versa users have reported problems getting their wristbands to activate when submerged underwater.
However, if you own one of these devices and want more peace of mind when swimming or doing other activities where being exposed to water may come up during daily life, then we recommend trying out Water Lock mode on your device today. Overall, I’m really happy with the water lock feature on my Fitbit tracker. It’s come in handy more times than I expected!